Table of Contents
Advertisement
2.9
Residual risks
The residual risks that were ascertained during the risk assessment carried out
for the product according to safety standard EN ISO 14121 - Safety of Machines -
are:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
L_151511_2
19.12.2019
Warning!
Despite careful design of the product and the implementation of all safety-
relevant regulations, further risks for persons and the product during the life-
time of the product cannot be fully ruled out.
► The additional safety instructions in the individual chapters of this manual
must therefore be carefully observed!
External venting of the secondary refrigerant circuit (see EN 378-1)
mechanical hazards due to sharp sheet metal edges and projecting parts
electrical hazards as a result of inadvertently coming in contact with terminals
and cables
thermal hazards as a result of inadvertently coming in contact with heat
exchangers and pipes
exposure to noise
hazards caused by vibration due to improper installation
hazards due to working materials and other materials in case of allergies or
the like.
neglect of ergonomic principles
combinations of various hazards
unexpected starting, unexpected rotation in case of wrong electrical connec-
tions or defects
shut down, emergency stop when defects are detected
changes to the rotational speed
power failure
failure of the control circuit or control loop,
incorrect assembly
fracture during operation
operating media or objects getting thrown out
loss of stability
personnel slipping, tripping or falling
danger from mixing of media
Safety
Residual risks
25
Advertisement
Table of Contents
