Table of Contents
Advertisement
General Information
Declaration of Conformity, Declaration of Incorporation
1.3.4
Service contracts
There is the possibility of concluding a long-term agreement for services (service
contract). For more information about the content, scope and conditions of possi-
ble services, please contact Technical Support.
•
1.4
Declaration of Conformity, Declaration of Incorporation
1.5
CE mark
By affixing the CE mark, the manufacturer confirms the conformity of the product
with the applicable EC Directives and compliance with the principle requirements
stipulated within them.
Fig.1:
The CE mark is affixed to the nameplate.
The CE mark for products from GEA Refrigeration Germany GmbH is provided
as defined in the Pressure Equipment Directive, i.e. pressure equipment is placed
on the market with the required equipment parts with safety function. This com-
plete assembly is subject to the Pressure Equipment Directive.
Compliance with the machinery directive is confirmed by the respective supplied
certificate.
1.6
Trademark rights
The product contains technical solutions for which GEA Refrigeration Germany
GmbH holds the patents or has applied for them.
1.6.1
Evaporator with distributed injection
The design of the evaporator with distributed injection, forced circulation, collec-
tion and return flow of refrigerant and oil is protected by law.
Patent DE 10 2010 010 840 B4 "Overrun evaporator with forced circulation"
1.6.2
Evaporator with integrated liquid separation
A patent has been applied for the position and design of the liquid separation
integrated in the evaporator.
Patent application 10 2013 010 510 A1
18
Email:
Info@gea.com
Notice
One of the following documents, depending on the product, is part of the
product documentation for the respective project:
► Declaration of incorporation
► Declaration of conformity
CE mark
L_151511_2
19.12.2019
Advertisement
Table of Contents
