Technical Specifications - GEA RedGenium Operating Instruction

Description
Design
3.1.1

Technical specifications

Standard equipment
Designation
Operating pressure:
Intended environment:
Ambient temperatures:
Installation altitude:
Outlet temperature of secondary refriger-
1
ant :
Heat carrier outlet temperature
Electric motor:
Refrigerant:
Type of oil:
Oil cooling:
Oil heaer:
Oil filter:
Spare oil filter:
Oil level switch:
Pressure sensors:
Safety pressure switch:
Overflow valve
Safety valve HP / LP:
Flow monitor:
Control:
Communication:
Power current and frequency inverter:
Colour:
Soundproof housing:
Vibration isolators:
Approval of pressure equipment:
Documentation:
1
2
28
Notice
The GEA RedGenium is manufactured and delivered according to technical
specifications.
► Optional equipment variants can be considered on the basis of the stand-
ard equipment.
Design
39 bar(a)
Closed machine rooms
+15 °C to +40 °C
≤ 1000 m above sea level
RedGenium 500 and RedGenium 1100: 3 °C to 35 °C
RedGenium 800: 8 °C to 22 °C
2 +50 °C to +70 °C
:
scope of delivery
R717
highly refined mineral oils CPI CP-1009-100
Caution!
Please contact the manufacturer in case of other types of oil.
► Contact the service or the design department of GEA Refrigeration Germany
GmbH.
Standard scope of delivery (air cooled)
scope of delivery
Single stage filter
Oil pressure filter cartridge, delivered separately (included)
none
on sensor block compressor
electronic
scope of delivery
Double safety valve with change-over valve
mechanical (paddle)
GEA Omni™
Modbus TCP
Default scope of delivery, cable entry from below
RAL 5014 (dove blue), control cabinet RAL 7035
none
without (standard)
CE-PED, Module H (piping)
electronic (provided on a server)
temperature difference secondary refrigerant maximum 10 K
Heat carrier temperature difference maximum 40 K, higher outlet temperatures on request
L_151511_2
19.12.2019