Disposal Of Packaging Material - GEA RedGenium Operating Instruction

Transport and storage

Disposal of packaging material

The plastic wrap must not be removed until immediately before erection in the
machine room at the intended location for installation. Until this point in time, the
plastic wrap serves to protect the product against exposure to the elements.
4.5 Disposal of packaging material
The generation of waste should be avoided or minimized wherever possible. Sur-
pluses and packaging materials not suitable for recycling should be disposed of
through an approved waste disposal company. Packaging materials not suitable
for recycling must always be disposed of in accordance with the requirements of
environmental protection and waste disposal legislation as well as the require-
ments of the local authorities.
Packaging materials suitable for recycling should be reused or reprocessed.
58
Notice
Essentially, all regulations and directives, such as described in the transport
instructions for the respective product series from GEA Refrigeration Ger-
many GmbH must be complied with.
The current version always applies. The transport instructions are valid for
in-house transport and transport to the customer, including the necessary
loading and unloading operations for the transport.
When introduced on the customer side, additional and other regulations can
apply that are not within the area of responsibility of GEA Refrigeration Ger-
many GmbH.
In the event of damages caused by deviations from the described transport
instructions and the use of impermissible slinging equipment, GEA Refriger-
ation Germany GmbH shall not be liable.
► The transport instructions can be accessed as a separate document
at GEA Refrigeration Germany GmbH.
L_151511_2
19.12.2019