Labelling Of The Control / Control Cabinet; Designation Of The Earthing Connection; Fig. 21 Test Verification For The Control System; Fig. 22 Designation Of The Earthing Connection - GEA RedGenium Operating Instruction

3.1.5.9 Labelling of the control / control cabinet

(information plate)
•
•
Fig.21:

3.1.5.10 Designation of the earthing connection

Safety labels
Fig.22:
Importance of the labels
Ensure that the product is properly grounded before start-up. Connect the earth-
ing connection. The necessary mounting hardware and cables are not included
in the scope of delivery.
See general assembly drawing for the position of the earthing connections.
L_151511_2
19.12.2019
Label on the rear side of the control unit of the control system (visible after
opening the switching cabinet):
– Project name
– Build number of the product
– MPI address
Label on the inside of the switching cabinet:
– Test verification for the control system
Test verification for the control system
Designation of the earthing connection
Description
Design
47