Snt-1 Board - Sony IPELA XIS-10DC Service Manual

2-9-2. SNT-1 Board

Removal
1. Remove the louver. (Refer to Section 1-2-1.)
2. Remove the PS-699 board.
(Refer to Section 2-9-1.)
3. Disconnect the harness from the connectors
(CN1, CN3, CN4, CN7, CN13, and CN14)
on the SNT-1 board.
4. Remove the four screws, and remove the
SNT-1 board.
Installation
5. Reinstall the SNT-1 board in the reverse
order of steps 3 and 4.
6. Reassemble the unit in the reverse order of
steps 1 and 2.
2-18 (E)
PSW3 x 6
CN13
CN1
CN4
SNT-1 board
CN3
CN7
CN14
XIS-10DC