Sony IPELA XIS-10DC Service Manual page 21

8. Disconnect the harness from the connectors
(CN4 to CN6, CN11, and CN19) on the PS-
699 board.
9. Disconnect the LAN cable and DC cable
from the PTZ camera assembly.
10. Remove the four screws, and remove the PS-
699 board and clamps.
11. Remove the four screws, and remove the
SNT-1 board.
12. Remove the four screws, and remove the PTZ
camera.
Installation
13. Reattach the PTZ camera in the reverse order
of steps 2 to 12.
n
When attaching the upper case assembly, be
careful not to have the harness caught in
together.
14. Reattach the louver. (Refer to Section 1-2-1.)
XIS-10DC
CN11
CN6
CN5
PSW3 x 6
PSW3 x 6
DC cable
CN4
Clamp
PSW3 x 6
Clamp
PS-699
CN19
SNT-1
board
LAN cable
PTZ camera
board
2-3 (E)