Table of Contents
Advertisement
4-5. Resetting of Date/Time Data
Required Equipment
. Personal computer (PC)
. Power supply for SNT-V501/V504
. LAN cable (cross cable)
n
When using a straight cable, connect the unit to the PC
through a hub that is not connected to any other net-
works.
Preparation
1. Connect each device in the power off state referring to
Section 4-1-2.
2. Turn on the power of each device.
3. Check that the date and time of the clock on the PC are
set correctly. If they are incorrect, set them correctly.
Resetting of date/time data
1. Display the administrator setting menu page referring
to Section 4-1-2.
2. After approximately 5 seconds, click "System" of the
Basic menu and display the System setting page.
3. Check that the "System (PC) current date time" of the
Date time setting is correct and click on the [Apply]
button.
4. Quit the System setting page.
4-6 (E)
XIS-10DC
Advertisement
Table of Contents
