Removing/Reattaching The Boards; Ps-699 Board - Sony IPELA XIS-10DC Service Manual

2-9. Removing/Reattaching the
Boards

2-9-1. PS-699 Board

Removal
1. Remove the louver. (Refer to Section 1-2-1.)
2. Remove the upper case assembly, and
disconnect the harness from the connectors
(CN12, CN13, and CN15 to CN17) on the
PS-699 board.
(Refer to steps 2 and 3 in Section 2-2.)
3. Remove the harness from the two clamps.
4. Disconnect the harness from the connectors
(CN2, CN4 to CN6, CN11, CN14, CN18, and
CN19) on the PS-699 board.
5. Remove the four screws, and remove the PS-
699 board.
Installation
6. Reinstall the PS-699 board in the reverse
order of steps 3 to 5.
7. Reassemble the unit in the reverse order of
steps 1 and 2.
XIS-10DC
CN11
CN14
CN6
CN5
PS-699 board
*: CN2/PS-699 board is mounted on the lower side (side B) of the unit
(Serial No. 10001 to 10005).
Clamp CN4
PSW3 x 6
*
CN2
CN18
Clamp
CN19
2-17 (E)