2-5-2. Lower Heater
Removal
1. Remove the louver. (Refer to Section 1-2-1.)
2. Remove the upper case assembly and PTZ
camera assembly.
(Refer to steps 2 to 7 in Section 2-2.)
3. Remove the lower heater by slipping away
the harness while suspending the two metal
plates of the heater brackets.
Installation
4. Reattach the lower heater and fix it with the
heater brackets.
n
Make sure to fix the lower heater into the
notch shown in the figure.
5. Reassemble the unit in the reverse order of
steps 1 and 2.
2-8 (E)
Lower heater
Notch
Lower heater
Heater brackets
Heater bracket
XIS-10DC