Using Markers To Number Points - Nikon DS-L4 Instructions Manual

Microscope camera control unit
Hide thumbs Also See for DS-L4:
Table of Contents

Advertisement

11.5.4

Using Markers to Number Points

You can add numbered markers at any points on the screen to count the number of points.
Markers are sequentially numbered for each color. You can use a maximum of six colors. If some numbered markers of
the same color are deleted, the remaining markers are renumbered.
1
Display the [TOOL MENU: MEAS/DRAW] screen.
2
Tap [MARKER].
3
Tap [COLOR], and then select the color of markers to be
added.
A marker counter is provided for each color.
4
Sequentially specify points on the screen.
Sequentially numbered markers are displayed at the
specified points.
5
To change the marker color, on the [MARKER] menu, tap
the [COLOR] button, and then select the desired color.
The counter of each color starts with 1.
The counter value of each color is retained and is not reset
when the color is changed.
6
Tap [CLOSE] to close the [MARKER] menu.
To move an existing marker
You can move an existing marker. To do this:
(1) Tap [SELECT].
(2) Select the marker that you want to move.
(3) Move the marker by mouse dragging.
(4) To redisplay the [MARKER] menu, tap [X] on the [SELECT] menu.
Chapter 11
Adding Lines and Annotations to an Image
122
1
6
3
Adding markers
2
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents