Nikon DS-L4 Instructions Manual page 112

Chapter 10
(5) Setting the magnification of the intermediate magnification lens
If the microscope is connected to the DS-L4 without using a USB cable, you can set the magnification of the
zoom/intermediate magnification lens. The magnification set here is applied only in OPTICAL calibration mode when the
microscope is connected to the DS-L4 without using a USB cable.
1 In the [TOOL MENU: MEAS/DRAW] menu, tap the desired
measurement or drawing button to display the
corresponding submenu.
2 Tap [INT MAG].
3 Tap [SELECT], and then select the magnification of the
intermediate magnification lens being used.
4 Tap [X] to close the [TOOL SET] screen.
To edit the list of intermediate magnification lenses
(1) Tap [EDIT], and then tap the button for the lens
whose data you want to edit.
(2) Enter the magnification.
(3) Tap [SAVE].
Preparation for Using the Annotation Function and Measurement Function
104
3
2
Setting the magnification of an intermediate
magnification lens