Nikon DS-L4 Instructions Manual page 62

If [OTHERS] is selected:
Button Scene mode
ASBESTOS
About [SCENE SELECT]
For details on [SCENE SELECT], refer to "13.2.1 (3) Changing the preset type of scene modes".
(2) Using a custom setting
In the DS-L4, a set of specific photographing conditions can be registered as a "custom setting". A maximum of seven
custom settings can be registered.
By registering custom settings, you can change the photographing settings in the same manner as you would switch a
scene mode.
1 In the LIVE menu, tap [SCENE/CSM].
2 Tap one of the [CUSTOM1] to [CUSTOM7] buttons to
select the custom setting you want to use.
Note: The scene modes displayed on the submenu change
according to the type of scenes you select
([SETTINGS] > [DS SETUP] > [MAIN] > [SCENE
SELECT]). For how to change the scene mode, refer
to "13.2.1 (3) Changing the preset type of scene
modes".
Comments of custom settings
You can add a comment to each custom setting. The
comment of the selected custom setting is displayed in
the comment display area of the [CAMERA MENU]
screen and information window.
Custom setting registration and automatic selection at the time of startup
 For how to register custom settings, refer to "8.2.2 (2) Registering custom settings".
 You can configure the DS-L4 to start up with the desired custom setting selected, when the power is turned on.
For how to set this function, refer to "13.2.1 (1) Calling a custom setting at startup".
Chapter 8
Capturing Images with the Advanced Setting Menu
This mode is suitable for photographing of asbestos specimens.
The color reproducibility in this mode is optimized for chrysotile (immersed in a liquid with
refractive index of 1.550), crocidolite (immersed in a liquid with refractive index of 1.680 or
1.700), and amosite (immersed in a liquid with refractive index of 1.680).
54
Description
1
Using a custom setting
Comment
entered during
registration
Comment of a custom setting
2