Setup (Pairing) Of Bluetooth Devices - Nikon DS-L4 Instructions Manual

13.6.5

Setup (pairing) of Bluetooth devices

A Bluetooth mouse and keyboard can be used with the DS-L4. Setup (pairing) is required before using a Bluetooth mouse
and keyboard.
Bluetooth devices that can be used
 The DS-L4 supports only mouses and keyboards as Bluetooth devices. Pairing of other devices is not
guaranteed.
 Although the HID profile is used for connecting a mouse and keyboard, we do not guarantee connection of all
HID-based Bluetooth devices.
1 Prepare a Bluetooth mouse or keyboard you want to use
with the DS-L4, and place it in Pairing mode. For details
on this operation, refer to the manual of the mouse or
keyboard.
2 In DS-L4 Administration Tool, click [Bluetooth (HID
Only)].
3 Select the device that you want to pair with the DS-L4,
and then click [Pair].
Subsequent operations differ depending on the Bluetooth
device. Refer to the manual of the device.
4 Redisplay the desktop.
Swipe from the right end to the center of the screen to
display the charms bar (see the figure on the right), and then
click [Start] and then [Desktop].
If a Bluetooth device cannot be used
If a Bluetooth device that has been successfully paired with the DS-L4 cannot be used, the power of the device
may be off. Alternatively, the DS-L4 may be in Flight mode.
About the pairing procedure
The pairing procedure described above may not be applied to some Bluetooth devices. If pairing fails with the
above procedure, try pairing as described in the manual of the device to be used.
Chapter 13
Changing Settings
158
Pairing