Connecting An External Display - Nikon DS-L4 Instructions Manual

3.2.3

Connecting an external display

Video signals from the DS-L4 can be output to an external display connected to it.
Specifications of the external display
The display to be used must be a PC display supporting an output resolution of 1920 x 1200 pixels (WUXGA).
Because the microHDMI connector of the DS-L4 main body does not support output resolution of 1920 x 1200 pixels,
use the DisplayPort interface or analog display connector of the cradle.
1 Make sure that power to the DS-L4 and the external display to be connected is turned off.
2 Use a commercially available cable to connect the DisplayPort or analog display connector of the cradle with the
video input terminal of the external display.
External display
External display
About the external display connectors
The analog display connector and the DisplayPort connector cannot be used concurrently.
Chapter 3
Installation and Connection
To the DisplayPort
To the analog display
connector
Connecting an external display to the DS-L4
12
Cradle
connector
Cradle