Nikon DS-L4 Instructions Manual page 108

Chapter 10
8 Tap [EDIT], and then enter a comment.
The entered comment is displayed in the comment display
area.
9 Tap [SAVE] to register the calibration setting.
Setting cannot be saved unless a value is entered correctly.
10 Tap [X] to close the [CALIBRATION SETTING] screen.
If a calibration value is not saved, the setting is discarded.
If you change the local calibration setting number ([M1] to
[M14]) to register new calibration settings before completing
input of both parameter and comment, data being set or
input is discarded and the previously registered data is
restored.
Registration in OPTICAL mode
To use the calibration value calculated from the magnification of the optical device (such as a microscope) that you enter:
1 In the [TOOL SET] screen, tap [CALIB SET].
2 Select the calibration data container (M1 to M14), and
then tap [OPTICAL].
3 Enter the magnification of the objective, and then tap
[OK].
Range of values that can be entered: 0.1 to 999.9
To use the software keyboard, tap [&123] and show number
keys.
Do not tap [X] on the software keyboard. If you do so, the
software keyboard disappears with the entry field displayed.
To redisplay the software keyboard, select the entry field.
4 Tap [EDIT], and then enter a comment.
The entered comment is displayed in the comment display
area.
5 Tap [SAVE] to register the calibration setting.
Setting cannot be saved unless a value is entered correctly.
6 Tap [X] to close the [CALIBRATION SETTING] screen.
If a calibration value is not saved, the setting is discarded.
If you change the local calibration setting number ([M1] to
[M14]) to register new calibration settings before completing
input of both parameter and comment, data being set or
input is discarded and the previously registered data is
restored.
Preparation for Using the Annotation Function and Measurement Function
100
Entering a comment
[OPTICAL] mode
Entering a value in OPTICAL mode
Entering a comment
10
8
9
2
6
4
5