Nikon DS-L4 Instructions Manual page 157

Adding a user or changing user Information
1 Display the [ACCOUNT: USER MANAGEMENT] screen.
2 To add a new user, tap [ADD]. To change the information
about an existing user, tap the user, and then [EDIT].
3 (When adding a new user) Set the user name.
You can use 1 to 16 alphanumeric characters to set the user
name. Once a user name is set, it cannot be changed. To
change a user name, add a user with a desired user name.
4 Set a password.
Notes on setting a password
For registration of a Supervisor or User:
The password you set here is a temporary password.
A temporary password can consist of 1 to 16
alphanumeric characters. When a supervisor or user
logs in to the DS-L4 for the first time, the DS-L4 asks
you to change the temporary password to the formal
password.
For registration of a Terminal User:
A password must consist of 8 to 16 characters that
include lowercase alphabetic, uppercase alphabetic,
and numeric characters.
5 Select the access level.
The access level of the user registered first must be set to
Supervisor.
The access level of a user who has already been registered
as Supervisor or User cannot be changed to Terminal User.
6 Tap [OK].
7 Tap [SAVE].
Deleting a user
1 Display the [ACCOUNT: USER MANAGEMENT] screen.
2 Tap the user to be removed, and then tap [CLEAR].
A confirmation message appears.
3 Tap [Yes].
4 Tap [SAVE].
Note on deleting accounts
If at least one user is registered, at least one user must be Supervisor. If you delete all users including
Supervisors, the last user you delete must be a Supervisor.
Chapter 13
Changing Settings
149
Editing user information