Dial-Backup Connect-Timeout (Tunnel Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup connect-timeout <seconds>
Use the dial-backup connect-timeout command to specify the number of seconds to wait for a connection
after a call is attempted before trying to call again or dialing a different number. It is recommended this
number be greater than 60. For more detailed information on PPP dial-backup functionality, refer to the
Functional Notes and Technology Review sections of the command.
Syntax Description
<seconds>
Default Values
By default, the dial-backup connect-timeout period is set to 60 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures the AOS to wait 120 seconds before retrying a failed dial-backup call:
(config)#interface ppp 1
(config-ppp 1)#dial-backup connect-timeout 120
61200990L1-35E
Selects the amount of time (in seconds) that the router will wait for a connection
before attempting another call (valid range: 10 to 300).
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
Tunnel Configuration Command Set
980