Timezone-Offset Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
timezone-offset <offset>
Use the timezone-offset command to specify the timezone adjustment (in hours) published to the client.
Syntax Description
<offset>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The following example sets the timezone adjustment for the client to -3 hours. For example, if the server
time is configured for eastern time and the client is configured for Pacific time, you can set the client
timezone adjustment to -3 hours:
(config)#ip dhcp pool MyPool
(config-dhcp)#timezone-offset -3
61200990L1-35E
Specifies the timezone adjustment (in hours) published to the client. Use an
integer from -12 to 12.
Command was introduced.
Copyright © 2005 ADTRAN
DHCP Pool Command Set
1162