Summary-Address Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
summary-address <address> <mask | prefix mask> not-advertise
Use the summary-address command to control address summarization of routes that are redistributed into
OSPF from other sources (e.g., RIP-to-OSPF, static-to-OSPF, etc.). The not-advertise option causes
suppression of routes that match the specified mask/prefix mask pair.
Syntax Description
<address>
<mask | prefix mask>
not advertise
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Usage Examples
The following example suppresses advertisement of the routes which match the specified address/mask:
(config)#router ospf
(config-ospf)#summary-address 11.0.0.0 255.0.0.0 not-advertise
61200990L1-35E
Specifies the IP address or Prefix A.B.C.D.
Routes matching this mask/prefix mask pair will be suppressed if the
not-advertise command is enabled.
Optional. Causes suppression of routes that match the specified mask/prefix mask
pair.
Command was introduced.
Copyright © 2005 ADTRAN
Router (OSPF) Configuration Command Set
1126