Server (Tacacs + Group Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
server <host>
Use the server command to specify a particular TACACS+ server's IP address or host name.
Syntax Description
<host>
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access
900 Series units.
Command History
Release 11.1
Usage Examples
The following example specifies the IP address of the TACACS+ server:
(config)#aaa group server tacacs+ TEST_GROUP
(config-sg-tacacs+)#server 192.168.1.1
(config-sg-tacacs+)#
61200990L1-35E
Specifies a TACACS+ server IP address.
Command was introduced.
Copyright © 2005 ADTRAN
TACACS+ Group Configuration Command Set
1192