Ppp Chap Hostname Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ppp chap hostname <hostname>
Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.
Use the no form of this command to remove a configured hostname. For more information on PAP and
CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |
eap | pap] on page 680.
Syntax Description
<hostname>
Default Values
By default, there are no configured PPP CHAP hostnames.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 11.1
Usage Examples
The following example specifies a PPP CHAP hostname of my_host:
(config)#interface demand 1
(config-demand 1)#ppp chap hostname my_host
61200990L1-35E
Specifies a hostname using an alphanumeric string up to 80 characters in length.
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
684