ADTRAN 5000 Series Command Reference Manual page 1147

Command Reference Guide
The Q.922 ADDRESS field is populated using the following:
8 7 6
DLCI (high order)
DLCI (lower)
Where the FECN, BECN, C/R, DE, and high order EA bits are assumed
to be 0, and the lower order extended address (EA) bit is set to 1.
The following list provides a few example DLCIs and associated Q.922 addresses:
DLCI (decimal) / Q.922 address (hex)
16 / 0x0401
50 / 0x0C21
60 / 0x0CC1
70 / 0x1061
80 / 0x1401
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Functional Notes
DHCP clients use client identifiers in place of hardware addresses. To create the client-identifier, begin with
the two-digit numerical code representing the media type and append the client's MAC address. For
example, a Microsoft client with an Ethernet (01) MAC address d2:17:04:91:11:50 uses a client identifier of
01:d2:17:04:91:11:50.
Usage Examples
The following example specifies the client identifier for a Microsoft client with an Ethernet MAC address of
d217.0491.1150:
(config)#ip dhcp-server pool Microsoft_Clients
(config-dhcp)#client-identifier 01:d2:17:04:91:11:50
61200990L1-35E
5 4 3
C/R
FECN BECN
Command was introduced.
Copyright © 2005 ADTRAN
2 1
EA
EA
DE
DHCP Pool Command Set
1147