Emerson Rosemount OCX 8800 Reference Manual page 2

Signal words and symbols
Pay attention to the following signal words, safety alert symbols, and statements.
WARNING!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION!
Indicates a hazardous situation which, if not avoided, could result in equipment damage.
NOTICE
Used to address messages or practices not related to personal injury or equipment damage.
Symbols
Essential Instructions
Read this page before proceeding!
Emerson designs, manufactures, and tests its products to meet many national and international standards. Because these
instruments are sophisticated technical products, you must properly install, use, and maintain them to ensure they continue to
operate within their normal specifications. The following instructions must be adhered to and integrated into your safety program
when installing, using, and maintaining Emerson's Rosemount products. Failure to follow the proper instructions may cause any one
of the following situations to occur: loss of life, personal injury, property damage, damage to this instrument, and warranty
invalidation.
• Read all instructions prior to installing, operating, and servicing the product.
• If you do not understand any of the instructions, contact your Emerson representative for clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
• Install your equipment as specified in the installation instructions of the appropriate instruction manual and per applicable
local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by Emerson.
Unauthorized parts and procedures can affect the product's performance, place the safe operation of your process at risk,
and VOID YOUR WARRANTY. Look-alike substitutions may result in fire, electrical hazards, or improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is being performed
by qualified people, to prevent electrical shock and personal injury.
The information contained in this document is subject to change without notice.
NOTICE
If a Model 375 Field Communicator is used with this unit, the software within the Model 375 may require modification. If a software
modification is required, please contact your local Emerson Service Group or National Response Center at 1-800-654-7768.
Earth (ground) terminal
Protective conduit terminal
Risk of electrical shock
Warning: Refer to instruction manual