Table of Contents
Advertisement
Hardware Preparation and Installation
1
TM-PIMC-0001 Transition Module Preparation
1-16
The TM-PIMC-0001 transition module (Figure 1-6) is used in conjunction
with all models of the MCPN750A baseboard. The features of this
transition module include:
Connections for two single wide, or one double wide PIM card.
Two asynchronous serial ports using RJ-45 connectors labeled as
COM1 and COM2.
Two asynchronous serial ports using 10-pin headers labeled as
COM3 and COM4.
One ethernet port using an RJ-45 connector
One IDE Flash connector using a standard 50-pin CompactFlash
socket.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
