Connector Pin Assignments
MCPN750A 10BaseT/100BaseTx Connector (J18)
Table 7-7. MCPN750A 10BaseT/100BaseTx Connector J18
7
MCPN750A Debug Connector (J19)
7-12
The 10BaseT/100BaseTx Connector is an RJ45 connector located on the
front panel of the MCPN750A SBC. The pin assignments for this
connector are as follows:
1
2
3
4
5
6
7
8
A 190-pin Mictor connector (J19 on the MCPN750A base board) provides
access to the processor bus (MPU bus) and some bridge/memory controller
signals. It can be used for debugging purposes. The pin assignments are
listed in the following table.
TD+
TD-
RD+
AC Terminated
AC Terminated
RD-
AC Terminated
AC Terminated
Computer Group Literature Center Web Site