Table of Contents
Advertisement
Installation
Hardware Upgrades and Accessories
The IXP/CPCI-9120 itself allows an easy and cost-efficient way to adapt the system board to
your application needs.
IO Daughtercard
The MSF mezzanine connects to the MSF interface of the IXP2400. Several flavors are
planned, thereby providing added expansion and flexibility.
IO-920
IO-920 MSF Mezzanine card is designed for use in Single Slot complex board. The IO-920
accommodates an Intel® IXF1104 Four Port Gigabit Ethernet Media Access Controller
(Vallejo), a Marvell 88E1145 Quad Gigabit Ethernet Transceiver, Multiplexers and Demulti-
plexers.
The IO-920 also houses an I/O connector through which MDI lines from the Dual Gigabit Eth-
ernet controller are brought into the IO-920. Through multiplexers and demultiplexers,
•
Signals from two ports of the on-board Quad PHY could be routed to the PSB.
•
Signals from the two ports of the baseboard Dual MAC (82546GB) could be routed to the
PSB.
PMC Module
The CPCI-9120 provides one VITA32-compliant Processor PMC site on to which additional
I/O or processing power may be added. The mounted Processor PMC may be configured in
Monarch or Non-monarch mode.
Note: The PMC site on IXP/CPCI-9120 shall support 3V-only PrPMCs.
Note: The total power consumption (from +12V, -12V, +3.3V and +5V) of the PMC
must not exceed 35 Watts. The power consumption from 5V and 3.3V shall not exceed
17.5Watts and 18W respectively.
IXP/CPCI-9120
All manuals and user guides at all-guides.com
Hardware Upgrades and Accessories
47
Advertisement
Table of Contents
