Table 3-1. Debugger Commands - Motorola MCPN750A Installation And Use Manual

Command
AS
BC
BF
BI
BM
BR
NOBR
BS
BV
CACHE
CM
NOCM
CNFG
CS
CSAR
CSAW
DC
DMA
DS
DU
ECHO
ENV
FORK
http://www.motorola.com/computer/literature
followed by the particular command mnemonic, as listed below,
followed by a carriage return. Keep in mind that help is now
available on both the BUG and DIAG side. In addition, issuing help
on a DIAG test category will give more information about the tests
in that category. The later is accomplished by entering HE,
followed by a space, followed by the test category description (e.g.,
UART), followed by a carriage return.

Table 3-1. Debugger Commands

Description
One Line Assembler
Block of Memory Compare
Block of Memory Fill
Block of Memory Initialize
Block of Memory Move
Breakpoint Insert
Breakpoint Delete
Block of Memory Search
Block of Memory Verify
Disable/Enable Cache
Concurrent Mode
No Concurrent Mode
Configure Board Information Block
Checksum
PCI Configuration Space READ Access
PCI Configuration Space WRITE Access
Data Conversion
Block of Memory Move
One Line Disassembler
Dump S-Records
Echo String
Set Environment
Fork Idle MPU at Address
Using PPCBug
3
3-7