Additional Journey Information For Eshift Shimano Di2 And Rohloff; Additional Eshift System Setting; Creating A User Account; Software Updates - Bosch KB060 KD Series Manual

• Information
Information on the Kiox on-board computer.
→ <Introduction to Kiox>
Explanation of the key functions and screens.
→ <Registration>
→ <FAQs>
Information on FAQs (frequently asked
questions).
→ <Certificates>
→ <License info>
→ <Contact>
You will find a detailed description of the
individual parameters in the online operating
instructions at
www.Bosch-eBike.com/en/Kiox-manual.
3.4.2.6 Additional journey information for
eShift Shimano DI2 and Rohloff
Only applies to pedelecs with this equipment
The gear or shift mode (Manual M/Automatic A) is
always displayed on the start screen. If you are
currently viewing another screen, the gear is
displayed briefly when the gear is changed. Since
the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills. If the pedelec is brought to a halt from a
speed greater than 10 km/h, the system can
automatically switch back to a pre-set start gear.

3.4.2.7 Additional eShift system setting

Only applies to pedelecs with this equipment
The following additional functions are available on
the function display:
Display
SET ST AR T G EA R
Table 18: Additional journey information
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
Change
You can change the gear in this
menu option.
Applies only to pedelecs with eShift with Shimano
DI2 derailleur gears. The following additional
function is available on the function display.
Display Change
ADJ U ST G EA R This is where you can make a fine
adjustment to the Shimano DI2.
You will find the specified setting
range in the gear manufacturer's
operating instructions. Make fine
adjustments if you hear the gear
shift making unusual noises.
Table 19: Additional journey information
Applies only to pedelecs with eShift with NuVinci
HISync/enviolo with optimised HISync.
The following additional function is available on
the function display.
Display
CAL IBR AT IO N
Table 20: Changing the system settings

3.4.2.8 Creating a user account

The rider needs to register on a PC or their
smartphone and create a user account to use all
the drive system's functions.
The user account can be used to change settings,
analyse routes and ride data and activate
premium functions among other things.

3.4.2.9 Software updates

Software updates are automatically transferred to
the on-board computer in the background of the
Bosch eBike Connect smartphone app as soon as
the app is connected to the on-board computer.
Once an update has been completely transferred,
this is displayed three times when the on-board
computer is restarted.
Alternatively, the user can check whether an
update is pending under Settings <My eBike>
<Components>.
Overview
Change
This is where you can perform
calibration on the continuously
variable gear. Follow the
instructions on the on-board
computer.
57