Rebooting Ht818 From Remote - Grandstream Networks HT818 Administration Manual

Analog telephone adaptor
Hide thumbs Also See for HT818:
Table of Contents

Advertisement

Busy Call Forward: Dial "*90" and then the forwarding number followed by "#". Wait for dial
*90
tone then hang up.
Cancel Busy Call Forward. To cancel "Busy Call Forward", dial "*91", wait for dial tone, then
*91
hang up.
Delayed Call Forward. Dial "*92" and then the forwarding number followed by "#". Wait for
*92
dial tone then hang up.
Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial "*93", wait for dial tone,
*93
then hang up
Flash/
Toggles between active call and incoming call (call waiting tone). If not in conversation,
Hook
flash/hook will switch to a new channel for a new call.
#
Pressing pound sign will serve as Re-Dial key.

Rebooting HT818 from Remote

Press "Reboot" button at the bottom of the configuration menu to reboot the ATA remotely. The web browser
will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again.
HT818 Administration Guide
Version 1.0.27.2
P a g e
|
68

Advertisement

Table of Contents
loading

Table of Contents