Grandstream Networks HT818 Administration Manual page 38

CPE SSL Private Key
Enable SNMP
SNMP Version
SNMP Port
SNMP Trap IP Address
Port of Trap port
SNMP Trap Version
SNMP Trap Interval
SNMPv1/v2c
Community
SNMPv1/v2c Trap
Community
SNMPv3 User Name
SNMPv3 Security Level
SNMPv3 Authentication
Protocol
SNMPv3 Privacy
Protocol
SNMPv3 Authentication
Key
SNMPv3 Privacy Key
SNMPv3 Trap User
Name
SNMPv3 Trap Security
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Enables / disables the SNMP function. Default is No
Choose between (Version 1, Version 2c, or Version 3).
Listening Port of SNMP daemon (Default 161).
IP address of trap destination.
Up to 3 trap destinations are supported. Users should enter the IP addresses
separated with comma (,).
Port of Trap destination (Default 162)
Choose between (Version 1, Version 2c, or Version 3).
Time interval between traps (Default is 5).
Name of SNMPv1/v2c community.
Name of SNMPv1/v2c trap community.
User name for SNMPv3.
•
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
•
authUser: Users with security level authNoPriv and context name as auth.
•
privUser : Users with security level authPriv and context name as priv.
Select the Authentication Protocol: "None" or "MD5" or "SHA."
Select the Privacy Protocol: "None" or "AES/AES128" or "DES".
Enter the Authentication Key.
Enter the Privacy Key.
User name for SNMPv3 Trap.
•
noAuthUser: Users with security level noAuthnoPriv and context name as
HT818 Administration Guide
Version 1.0.27.2
P a g e | 37