Grandstream Networks HT818 Administration Manual page 43

Syslog Level
Send SIP Log
Automatic Reboot
Download Device
Configuration
Download Device XML
Configuration
Upload Firmware
Upload Configuration
Export Backup
Configuration
Selects log level; the level is one of DEBUG, INFO, WARNING, and ERROR.
Syslog messages are sent based on the following events. Default is NONE.
1. Product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. Sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. Inbound and outbound calls (INFO level)
6. Registration status change (INFO level)
7. Negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. Memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components:
GS_LOG: [device MAC address] [error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]
Ethernet link is up
Configures the HT818 to send a replicate of the SIP packets on the syslog.
Default is No
Default is No. When "Yes, reboot every day at hour" or "Yes, reboot every week
at day" or "Yes, reboot every month at day" is checked, user can specify "Hour of
the day (0-23)" or "Day of the week (0-6)" or "Day of the month (0-30)". Default
time is Monday 1AM.
Downloads actual device configuration file in .txt format.
Downloads actual device configuration file in .xml format.
Allows users to upgrade the firmware with a single firmware file by browsing and
loading the file from computer (local directory).
Allows users to upload the configuration file by browsing and loading it from
computer (local directory).
Download backup file to local computer.
The backup file is XML and encrypted.
HT818 Administration Guide
Version 1.0.27.2
P a g e | 42