Grandstream Networks HT818 Administration Manual page 31

Analog telephone adaptor
Hide thumbs Also See for HT818:
Table of Contents

Advertisement

Preferred DNS server
Statically configured as
IP address
Enable Management
Interface
Management Access
Management Interface
IPv4 Address
Time Zone
Self-Defined Time Zone
Allow DHCP server to
set Time Zone
Language
Device Mode
NAT Maximum Ports
a service name for the PPPoE connection, enter the service name here.
This field is optional. Default is blank.
Specifies preferred DNS server to use when DHCP or PPPoE are set.
Configure IP address, subnet Mask, default router IP address, 1
server, 2
preferred DNS server. These fields are set to zero by default.
nd
An interface for HTTP/HTTPS/SSH, the management interface will be a VLAN
interface if management VLAN is configured and different to service VLAN,
otherwise, a sub interface will be created on service interface. Sub interface can
only be configured with a static IP address without the default gateway if both
management and service interface are using the same VLAN the management
interface will automatically use the gateway of the service interface.
Allows to choose which interface can be reached for HTTP/HTTPS/SSH.
Allow to choose how the IP address will be obtained on the gateway for
management interface static or Dynamic (DHCP).
802.1Q/VLAN Tag
802.1p priority value
Selects time zone to define date/time on the device.
Allows users to define their own time zone.
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it
will override selected time zone. If set to "No", the analogue adapter will use
selected time zone even if provided by DHCP server. Default is Yes.
Configures the languages of the voice prompt and web interface. Available
languages: English, Chinese, Spanish and Russian.
Controls whether the device is working in NAT router mode or Bridge mode. Save
the setting and reboot prior to configuring the HT818.
Defines the number of ports that can be managed while in NAT router mode.
HT818 Administration Guide
Version 1.0.27.2
Assigns the VLAN Tag of the Layer 2 QoS packets
for Management interface.
Assigns the priority value of the Layer 2 QoS
packets for management interface. Valid range is 0
to 7.
st
preferred DNS
P a g e
|
30

Advertisement

Table of Contents
loading

Table of Contents