Saving The Configuration Changes; Rebooting The Handytone-486 From Remote; Configuraentraltion Through Aentral Centraentrall Server - Grandstream Networks HandyTone-486 User Manual

HandyTone-486 User Manual
Authenticate Conf
File
Lock keypad
update
Allow conf SIP
Account
in Basic Settings
Volume
Amplification
Powerline Ring
Tone
Call Progress Tones Using these settings, users can configure various call progress tone frequencies
Disable Line Echo
Canceller (LEC):
6.2.4

Saving the Configuration Changes

Once a change is made, users should click on the "Update" button in the Configuration page. The
HandyTone-486 will then display a screen to confirm that the changes have been saved.
6.2.5

Rebooting the HandyTone-486 from remote

The user/administrator of the HandyTone-486 can remotely reboot the HandyTone-486 by pressing the
"Reboot" button at the bottom of the configuration page. Once done, a screen will be displayed to
indicate that rebooting is underway.
6.3 Configuration through a Central Server
Grandstream HandyTone ATAs can be automatically configured from a central provisioning system.
Default is "No". If set to "Yes", configuration file would be authenticated
before acceptance. End user should use default setting.
If this parameter is set to "Yes", except for IVR MENU items 1 to 5, the
configuration update via keypad is disabled.
Default "No". If set to "Yes", user ID, authentication IP, authentication
password and display name can be configured in BASIC SETTINGS page.
Handset volume adjustment. RX is for receiving volume, TX is for
transmission volume. Default values are 0dB for both parameters. +6dB
generates the highest volume and -6dB generates the lowest volume.
This setting allows user to configure the ringing frequencies and cadences.
and cadences according to their country standard. By default they are set to
North American standard.
Frequencies should be configured with known values to avoid uncomfortable
high pitch sounds. ON is the period of ringing ("On time" in 'ms') while OFF
is the period of silence. In order to set a continuous ring, OFF should be zero.
Otherwise it will ring ON ms and a pause of OFF ms and then repeat the
pattern. Up to three cadences are supported.
Default is No. If set to Yes, echo canceller is not used.
29
Grandstream Networks, Inc.