Grandstream Networks HT818 Administration Manual page 59

Ring tones
Distinctive Call Waiting
Tone
Call Waiting Tones
Call Features Settings
Enable Call Features
Reset Call Features
SRTP Feature
SRTP per call Feature
CID Feature
CID per call Feature
Direct IP Calling Feature
CW Feature
CW per call Feature
Call Return Feature
Configures the ring tone cadence preferences. User has 10 choices. The
configuration, completed in Distinctive Ring Tones block in the same page, applies
to ring tones cadences configured here.
This feature allows users to configure call waiting tones depending on the caller
ID. Up to 3 Distinctives tones can be configured. Default is Call Waiting Tone 1.
This feature allows user to customize call waiting tones. Up to 10 tones can be
configured. Default is "f1=440@-13,c=300/10000"
When enabled, Do No Disturb, Call Forward and other call features can be used
via the local feature codes on the phone. Otherwise, the ITSP feature codes will
be used. Enable All will override all individual features enable setting. Default is
Yes
Allows users to reset all call features configuration. Default is No
Allow users to customize the SRTP feature codes. Default is Yes
- Enable SRTP: Default is 16
- Disable SRTP: Default is 17
- Enable SRTP per call: Default is 18
- Disable SRTP per call: Default is 19
Allow users to customize the CID feature codes. Default is Yes
- Enable CID: Default is 31
- Disable CID: Default is 30
- Enable CID per call: Default is 82
- Disable CID per call: Default is 67
Allow users to customize the Direct IP feature code. Default is Yes
- Direct IP Calling: Default is 47
Allow users to customize the CW feature codes. Default is Yes
- Enable CW: Default is 51
- Disable CW: Default is 50
- Enable CW per call: Default is 71
- Disable CW per call: Default is 70
Allow users to customize the Call Return feature code. Default is Yes
- Call return: Default is 69
HT818 Administration Guide
Version 1.0.27.2
P a g e | 58