Grandstream Networks HT818 Administration Manual page 30

Analog telephone adaptor
Hide thumbs Also See for HT818:
Table of Contents

Advertisement

IPv4 Address
IPv6 Address
Dynamically
assigned
via DHCP
Use PPPoE
Allows users to configure the appropriate network settings on the HT818 to obtain
IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By default, it is
set to "DHCP".
DHCP mode: all the field values for the static IP mode are not used
(even though they are still saved in the flash memory.) The HT818
acquires its IP address from the first DHCP server it discovers from
the LAN it is connected.
Use PPPoE: set the PPPoE account settings. If selected, HT818
will attempt to establish a PPPoE session if any of the PPPoE fields
is set.
Static IP mode: configure IP address, subnet Mask, default router
IP address, 1
These fields are set to zero by default.
Allows users to configure the appropriate network settings on the HT818 to obtain
IPv6 address. Users could select "DHCP", "Static IP". By default, it is set to
"DHCP".
All the field values for the static IP mode are not used (even though they are still
saved in the flash memory.) The ATA acquires its IP address from the first DHCP
server it discovers from the LAN it is connected.
DHCP hostname: Specifies the name of the client. The name may or
may not be qualified with the local domain name. This field is optional but
may be required by ISP.
DHCP domain name: Specifies the domain name that the client should
use when resolving hostname via the Domain Name System.
DHCP vendor class ID: Exchanges vendor class ID by clients and
servers to convey particular configuration or other identification
information about a client. Default is HT8XX.
Set the PPPoE account settings. If selected, ATA attempt to establish a PPPoE
session if any of the PPPoE fields is set.
PPPoE account ID: Defines the PPPoE username. Necessary if ISP
requires you to use a PPPoE (Point to Point Protocol over Ethernet)
connection.
PPPoE password: Specifies the PPPoE account password.
PPPoE Service Name: Defines PPPoE service name. If your ISP uses
HT818 Administration Guide
Version 1.0.27.2
st
preferred DNS server, 2
nd
preferred DNS server.
P a g e
|
29

Advertisement

Table of Contents
loading

Table of Contents