Disable Weak TLS
Cipher Suites
Minimum TLS Version
Maximum TLS Version
Syslog Protocol
Syslog Server
create the second file.
•
When "SIP File Option" is set to Default "Keep", device will keep the call
records when both files are full, no more new record will be stored.
•
When this feature is set to "Override", device will clear the first SIP file and
start storing again.
The SIP file output will be available at Status page: [SIP File]
Note: "Send SIP Log" must be enabled to be able to capture the trace.
This feature allows users to disable weak ciphers. The given choices are:
Enable Weak TLS Ciphers Suites.
1-
Disable Symmetric Encryption RC4/DES/3DES.
2-
Disable Symmetric Encryption SEED.
3-
Disable All Of The Above Weak Symmetric Encryption.
4-
Disable Symmetric Authentication MD5.
5-
Disable All Of The Above Weak Symmetric Authentication.
6-
Disable Protocol Version SSLv2/SSLv3.
7-
Default is Enable Weak TLS Ciphers Suites.
The Feature allows users to choose the Minimum TLS Version. Choices are:
Unlimited.
1-
TLS 1.0.
2-
TLS 1.1.
3-
TLS 1.2.
4-
Default is Unlimited.
The Feature allows users to choose the Maximum TLS Version. Choices are:
Unlimited.
1-
TLS 1.0.
2-
TLS 1.1.
3-
TLS 1.2.
4-
Default is Unlimited.
Allows the users to customize the Syslog Protocol and use either UDP (Default)
or SSL/TLS.
Sets IP address or URL of system log server. The server collects system log
information from the HT818.
Note: A reboot is required to take effect.
HT818 Administration Guide
Version 1.0.27.2
P a g e
|
41