Access Code - Xylem MJK Shuttle Manual

Appendix

Access code

To gain acces to the remaining menus, an access code is
required.
Press and hold 'Escape' at least for 5 seconds:
The access code can now be selected:
Use the arrow keys to select...
(Standard access code is 100:)
...and confirm with 'ENTER':
All password protected menus can now be selected.
Shuttle will display the current level readings between menu
®
selections.
Shuttle will revert to normal readout if:
®
1: the keyboard has not been used within 5 minutes.
2: 'Escape' is pressed.
The acces code must then be entered again for access to
the password protected menus.
EN 2.10 Shuttle Manual 1712 58 SW 838023