Removing The Seat; Mounting The Seat - KTM 250 XC TPI Owner's Manual

11.20

Removing the seat

11.21

Mounting the seat

–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
V01703-11
Guideline
Screw, frame protec-
tor
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
K01133-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
H02218-11
SERVICE WORK ON THE CHASSIS 11
7
with the washers.
M5 3 Nm (2.2 lbf ft)
8
.
M5 3 Nm (2.2 lbf ft)
1
.
p. 47)
59