Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - KTM 250 XC TPI Owner's Manual

11.38

Checking the frame

11.39

Checking the link fork

11.40

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in the throttle cable comply with the specifica-
tion.
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Remaining nuts,
chassis
V01712-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
S02306-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
S02305-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
SERVICE WORK ON THE CHASSIS 11
M6
M6
Info
Always replace a frame that has been dam-
aged due to a mechanical impact. Repair of the
frame is not authorized by KTM.
Info
Always replace a damaged link fork. Repairing
the link fork is not authorized by KTM.
p. 59)
( p. 65)
10 Nm
(7.4 lbf ft)
10 Nm
(7.4 lbf ft)
p. 47)
73