7 PREPARING FOR USE
7.7
24
M01106-01
600868-01
Preparing the vehicle for riding on wet and muddy circuits
M01106-01
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.
–
Clean the chain.
Chain cleaner (
p. 136)
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray (
p. 137)
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.