KTM 250 XC TPI Owner's Manual page 54

11 SERVICE WORK ON THE CHASSIS
52
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
The air suspension AER valve is located in the left fork
leg.
Grooves are milled into the side of the upper end of the
H01182-11
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
–
Secure the wiring harness and the clutch line with the cable
holder.
V01698-10
–
Tighten screw
Guideline
Screw, top steering
head
V01699-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
V01700-10
–
Tighten screws
Guideline
Screw, top triple
clamp
V01698-11
5
of the right fork leg is positioned to
of the left fork leg faces the front.
6
.
M8 12 Nm (8.9 lbf ft)
4
.
M20x1.5 12 Nm (8.9 lbf ft)
7
.
M8 20 Nm (14.8 lbf ft)
8
.
M8 17 Nm (12.5 lbf ft)
Loctite ® 243™