KTM 250 XC TPI Owner's Manual page 101

Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under
the seat.
V01677-10
V01678-10
V01677-10
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the seat. ( p. 59)
Main work
–
1
Pull EFI control unit
to the side.
–
3
Pull starter relay from the holder.
–
4
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
6
A spare fuse is located in the starter relay.
–
Insert a new main fuse.
Fuse (58011109110) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
3
Mount starter relay onto the holder and route the cable.
–
Mount the EFI control unit
Finishing work
–
Mount the seat. ( p. 59)
ELECTRICAL SYSTEM 14
while the engine is
2
upward off rubber lugs and hang
.
5
.
A
.
p. 130)
1 2
on the rubber lugs .
99