Recommended Work - KTM 250 XC TPI Owner's Manual

Table of Contents

Advertisement

9 SERVICE SCHEDULE
Check the antifreeze and coolant level. (
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without kinks, and set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Service the fork.
Perform the shock absorber service.
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Change the fuel screen.
Check the fuel pressure.
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the error memory after the test ride using the KTM diagnostics tool.
Make a service entry in KTM Dealer.net.
One-time interval
Periodic interval
9.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Clean the pressure sensor hose.
Service the fork.
Perform the shock absorber service.
Check the electric starter drive.
Change the fuel filter.
Check the reed valve housing, reed valve and intake flange.
Change the oil pump, clean the oil screen in the oil tank.
Clean the oil screen in the oil tank.
Clean the protection cap of the ambient air pressure sensor.
Perform minor engine service. (Check the exhaust control for functioning and smooth
operation. Check the clutch.)
34
(
p. 112)

Recommended work

(
(
p. 101)
(
p. 62)
(
p. 64)
After 20 operating hours / Every 20 operating hours
After 10 operating hours / Every 10 operating hours
p. 76)
(
p. 54)
p. 115)
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
After 1 operating hour
Every 80 operating hours
Every 40 operating hours
every 12 months

Advertisement

Table of Contents
loading

This manual is also suitable for:

300 xc tpiF6375t5F6475t5

Table of Contents