KTM 250 XC TPI Owner's Manual page 118

17 SERVICE WORK ON THE ENGINE
116
–
Loosen clamps
–
Lift the subframe slightly and secure it.
Info
Pay attention to intake flange
–
Pull throttle valve body
flange, and hang it to the side.
V01723-10
–
Open hose clamp
–
Pull off the angle piece and collect the 2-stroke oil in a suit-
able container.
V01725-10
–
Remove oil screen
–
Check the oil screen for damage.
» If the oil screen is damaged:
–
Replace the oil screen.
V01724-10
–
Insert the oil screen and mount the angle piece with a new
hose clamp.
Hose clamp plier (60029057000)
S03506-10
4
of the throttle valve body.
5
.
6
towards the rear, out of the intake
7
using a screwdriver.
8
and clean it.