10 TUNING THE CHASSIS
10.14
10.15
44
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
V01655-10
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
M01100-10
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way.
Info
1
Adjuster
is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping during compression.
–
1
Remove protection cap
–
2
Turn adjusting screw
Info
2
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
p. 47)
17 clicks
12 clicks
7 clicks
.
clockwise all the way.
is located at the lower end of the