KTM 250 XC TPI Owner's Manual page 60

11 SERVICE WORK ON THE CHASSIS
58
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
V01709-10
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
M01149-01
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
V01710-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
V01711-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount screw more
easily.
A
.
2
.
M16x1.5 100 Nm
(73.8 lbf ft)
3
engages in the foot brake cylinder.
4
.
M6 10 Nm (7.4 lbf ft)
5
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
6 .
M10 60 Nm (44.3 lbf ft)
Loctite ® 2701™