Local Remote Monitor (Basic) - Generac Power Systems PowerPact 6561 Installation Notes

Mobile Link Enrollment/Activation
 You will need the following information to activate the unit:
 One to Four E-mail addresses
 One to Four Cell phone numbers (with texting capabilities)
 Model Directory Number (MDN) located on the bottom of the Mobile Link of the box it came in.
 Mobile Equipment Identification Number (MEID) located on the Mobile Link box.

The generator's serial number.
 Owner's mailing address.
 Valid credit card for the owner.
 Address of the generator (if different from the owner).

You may also want to think of a name for the generator ex: Joe Smith Generator #1. This is in case
you have multiple generators or if one of the notifications is going out to your service technician he
can identify whose generator just sent him a message.
 Go online to www.mobilelinkgen.com to complete the registration process.
 Enter the required information and choose your renewal plan (the first year of service is free).
 Once the enrollment is complete, the Mobile Link's top LED will illuminate.

Open the generator, press the OFF button.
 Remove the 7.5A fuse, turn the main utility disconnect to the transfer switch to OFF or Open position.
 Remove T1 fuse from the transfer switch.
 Disconnect the Black (-) battery cable, then disconnect the Red (+) battery cable.
Transceiver Installation
 2008 - 2012 with LCD Display
 Locate the mounting feature cover plate on the back of the generator.
 Remove the cover plate, then mount the transceiver and gasket on the back of the generator with
screws provided.
 Transceiver Installation is similar to MobileLink
 After installation is complete:
 Reconnect the battery Red (+) wire, then the Black (-) wire. Replace the positive terminal Cover.
 Reinstall all covers, check to see that the unit is in to Off mode, reinstall the 7.5A fuse.
 Reinstall the T1 fuse and turn on the utility power supply to the transfer switch.
 Follow the install wizard instructions to reset the generator date and time.
Local Remote (Basic) Monitor
92