Generac Power Systems PowerPact 6561 Installation Notes page 19

Installing the Optional Fascia Kit
 Screw the four rubber bumpers into the threaded holes on the inside ends of the fascia.
 Snap one of the end pieces on to the front Fascia and the other end piece on to the rear fascia.
 DO Not snap the front and rear together at this time. Next place both assemblies at the base of the
generator and fit the rubber bumpers into the lifting holes in the generator base.
 Once aligned, snap the front and rear assemblies together.
 Looks nice, also makes the generator critter proof.
DO NOT Install Inside the House!
19