R&S TSMA6 Getting Started page 37

®
R&S TSMA6
– WLAN / LAN connection with the NESTOR host (see
"Accessing the R&S
– PC with NESTOR master installation to check the measurement on the
R&S TSMA6
NESTOR Mode
To use the R&S TSMA6 in NESTOR mode, the following steps must be per-
formed.
1. In the web-GUI, set the "Mode of Operation" to "NESTOR" and press "Sub-
mit".
2. Select a NESTOR workspace file (see
on page 41).
3. Select a scenario ("Monitoring" or "Cellular Network Analysis").
Getting Started 4900.8040.02 ─ 07
TSMA6", on page 28)
"Import NESTOR workspace file"
Configuring the R&S TSMA6
Measurement Modes
Chapter 6.1,
37